BDS Suspension 2020-2022 Super Duty 4in. 4 Link Suspension Lift - Diesel engine - NX2 - BDS1567H
Suspension Lift Kit
BDS1567H
2020-2022 Super Duty 4in. 4 Link Suspension Lift - Diesel engine - rear block - NX2
- Easy 100% Bolt-on installation
- Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
- Heavy duty 4-Link control arms offer improved handling stability strength and caster control during wheel travel
- Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
- Fabricated steel blocks provide level stance from front to rear
- Standard NX2 Nitro shocks with vehicle-specific valving for better control
- Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
- Ford recommends the replacement of the pitman arm nut after each time it has been removed.
- Due to factory ride heights being lower on 2020 and newer model year trucks the net lift you will gain with this kit will be 1 more than advertised. (EX. 4" kit will net 5" of lift)"
- If installed on a truck with a top-mounted overload spring with an overload spacer block taller than 1-1/8 UBT4027 (Qty: 4) is required."
- Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper.
- If your truck is equipped with a 2-piece rear driveshaft a Carrier Bearing Drop Kit may be required: BDS123402.
- Due to the taller factory ride height Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models.
- Larger tires on the stock wheel are not recommended due to the brake line clearance required. Use recommended specs listed in the wheel and tire fitment section.
- Minor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups.
- Installation requires a torque wrench capable of 405 ft-lbs.
- Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure BDS recommends having this performed prior to installing the lift.
Availability: Available To Order
Pricing:
$2,068.55
Description
Raise the height of your Ford Super Duty diesel powered truck with this 5-inch lift kit and 4-Link conversion from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 37 tires."; To optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.; Up front the lift kit includes diesel-specific Pro-Ride coil springs 4-link control arms with conversion brackets forged drop pitman arm and track bar bracket for steering correction sway bar relocation brake line brackets and precision tuned nitrogen charged shocks.; In the rear this kit utilizes a high-strength fabricated lift block longer u-bolts brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.; 4-Link Conversion; Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength ΒΌ-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.; Pro-Ride Coil Springs; A pair of full-length diesel-specific Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains.; Steering Correction
Details
- BDS1567H
- BDS1567H
- BDS Suspension
- Available To Order
- New
Categories
Shipping Information
- Item Requires Shipping
- Free Shipping!
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!