BDS Suspension Lift Kit 2020-2022 Ford F-250 Super Duty/F-350 Super Duty - BDS1551F

2020-2022 F250-F350 4.5in. Radius Arm Suspension Lift System- 2.5 coilover - Diesel engine

• FOX 2.5 Coil-Over mounts in factory coil bucket location
• Adds additional secondary FOX 2.0 shock for max performance
• Eibach coil springs ride smooth through the roughest terrain
• Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance
• Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
• Fabricated steel blocks provide level stance from front to rear
• FOX shocks are fully serviceable and resistant to corrosion and harsh environments
• Ford recommends the replacement of the pitman arm nut after each time it has been removed.
• Due to factory ride heights being lower on 2020 and newer model year trucks the net lift you will gain with this kit will be 1 more than advertised. (EX. 4" kit will net 5" of lift)"
• If installed on a truck with a top-mounted overload spring an overload spacer block taller than 1-1/8 UBT4027 (Qty: 4) is required."
• Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper.
• If your truck is equipped with a 2-piece rear driveshaft a Carrier Bearing Drop Kit may be required: BDS123402.
• Due to the taller factory ride height Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models.
• Larger tires on the stock wheels are not recommended due to the brake line clearance required. Use recommended specs listed in the wheel and tire fitment section.
• Minor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups.
• Installation requires a torque wrench capable of 405 ft-lbs.
• Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure BDS recommends having this performed prior to installing the lift.